Yanmar BY series, Руководство по установке

Страница: 9 / 33

Page Electronic Control System: Installation Manual for BY Series Engines with Classic Controls
Installation
Install Battery Switch and Engine Breaker
Install the battery switch and close to the battery switch install an 0 amp circuit breaker. The circuit breaker
will need to be located so the . meter ( foot) cable supplied on the engine can reach the breaker. Do not
extend this cable.
The wire from the battery switch to the circuit breaker should not be longer than one meter ( feet). The wire
size should be 10mm
(AWG ).
The wire size of the main ground cable and the cable to the starter motor should be sized based on their length.
When determining the wire size add the length of the negative cable from the engine block to the battery and the
length of the positive cable from the starter to the battery together.
Distance Wire size
Less than 5 meters (16 feet) 20mm
2
AWG 4
Less than 9 meters (30 feet) 40mm
2
AWG 1
Breaker Wiring Diagram