Yanmar 2TNV70, Руководство по эксплуатации

Страница: 42 / 142

PRODUCT OVERVIEW
24
TNV Operation Manual
GAUGES AND INDICATORS
The operator’s console provides you with the
means to start and stop the unit and a series of
gauges and indicators that inform you about the
current status of the engine. This is a required
engine component. Since the operator’s console
is application specific, it must be carefully
selected by an application engineer. It is not part
of the basic engine package as shipped from the
Yanmar factory.
Gauges
The following gauges are located on a typical
operator’s console. Some operator’s consoles
may not have the gauges described here or may
have different gauges.
Figure 5
Figure 6
Tachometer - The tachometer display
(Figure 5, (1)) or (Figure 6, (1)) shows the
engine speed in Revolutions Per Minute (rpm).
Engine Coolant Temperature - The engine
coolant temperature display (Figure 5, (2)) or
(Figure 6, (2)) shows the temperature of the
engine coolant.
Engine Oil Pressure - The engine oil pressure
display (Figure 5, (3)) or (Figure 6, (3)) shows
the pressure of the engine oil.
Hour Meter - The hour meter display
(Figure 5, (4)) or (Figure 6, (4)) shows the total
number of hours the engine has run. This is
useful for planning the
Periodic Maintenance
Procedures operations on page 75.
CAUTION
0000018en
The illustrations and descriptions of
optional equipment in this manual, such
as the operator’s console, are for a
typical engine installation. Refer to the
documentation supplied by the optional
equipment manufacturer for specific
operation and maintenance instructions.
0000023A
(4)
(1) (2)
(3)
10
20
20
40
100
180
220
250
60
80
0
30
40 0
x100
RPM
VDO
VDO
PSI
F
C
0
1
2
3
4
5
bar
80 100
120 0
AUX
MC-704HP-G4
0000024A
(1)
(2)
(4)
(3)