Yamato VFK2560-8, Инструкция по эксплуатации

Страница: 3 / 52

CONTENTS
5.13 Adjusting the fabric lapping(both-side fabric edge trimming) 23
5.14 Adjusting SC30 device 24
5.15 HR device and SP device 25
5.16 Cleaning 26
6. Adjustments 27
6.1 Needle thread tension 27
6.2 Top cover thread tension 28
6.3 Looper thread tension 29
6.3.1 Looper thread tension 29
6.3.2 Position of looper thread take-up 30
6.4 Height of presser foot 31
6.5 Replacing presser foot spring plate 31
6.6 Replacing and adjusting knives 32
6.7 Height of needle bar 33
6.8 Looper 34
6.8.1 Installing angle and height of looper 34
6.8.2 Distance between looper and needle 34
6.9 Back-and-forth position of needle and looper 35
6.10 Needle and needle guard 36
6.10.1 Needle guard(rear) 36
6.10.2 Needle guard(front) 37
6.11 Height of feed dog 37
6.12 Needle and spreader 38
6.12.1 Spreader 38
6.12.2 Top cover thread guide 39
6.12.3 Top cover thread eyelet 39
6.12.4 Top cover thread pusher 40
6.13 Replacing presser foot 41
7. Specifications 43
Attention
The parts used for this product are subject to change without notice. If such a change is made, any part of the contents and illustrations of
this instruction manual may not conform to this product.
In preparing the instruction manual, we have made our best efforts for making it free of any error or omission. If any error or omission
should yet be found, it might not be rectified immediately.
Attention
◇ This instruction manual is designed mainly for technicians, but it is advisable that also operators read the instructions with mark to
use the machine properly.
◇ The numbers in lower left corners of figures are figure numbers. We use them in texts as needed for your reference.