manualshive.com logo in svg

Yamato VFK2560-8, Инструкция по эксплуатации

Поделиться
Скачать
Yamato VFK2560-8 Скачать руководство пользователя страница 28

21

VFK2560-8

5. Proper operation

①

②

5.11 Use of lap former

Right-and-left position:

In  the  standard  position,  the  tip  of  the  lap  former ③  is 

aligned with the center point of the four needles.

According  to  the  right-and-left  fabric  overlap  or  feed 

condition,  adjust  the  right-and-left  position.  Loosen  the 

screws ⑥ to make this adjustment.

●  When  the  position  is  moved  toward  the  left,  the 

upper  fabric  overlap  increases,  and  the  lower  fabric 

decreases.

●  When  the  position  is  moved  toward  the  right,  the 

upper  fabric  overlap  decreases,  and  the  lower  fabric 

increases.

Back-and forth position:

In  the  standard  position,  the  lap  former  slide  block ④ 

touches and stops at the stitch plate ⑤ .

According  to  the  fabric  thickness,  loosen  the  screw ⑦ , 

and adjust the position slightly toward the operator.

③

④

⑤

⑥

⑦

5.10 Height of lower knife

Before operating, ALWAYS turn the power switch OFF and check that the machine has already stopped.

Fig. 5-17

The lower knife height is adjusted after loosening the screw

① .  Adjust this height to suit the amount of overlap in the 

fabric.

When  the  lower  knife  is  raised,  the  fabric  overlap 

increases.

When  the  lower  knife  is  lowered,  the  fabric  overlap 

decreases.

Check that the tip of the upper knife does not touch 

the presser foot.

 

 　ATTENTION

Fig. 5-18

Содержание VFK2560-8





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды