manualshive.com logo in svg

Yamato VFK2560-8, Инструкция по эксплуатации

Поделиться
Скачать
Yamato VFK2560-8 Скачать руководство пользователя страница 21

14

VFK2560-8

5

. Proper operation

5.1 Opening and closing covers

Front cover

①

Pull the top part of the right end toward you, and lower it 

forward.

Cam cover

②

Pull the left end toward you, and turn it to the right.

Side cover

③

Push the right end to the left, and turn it to the left.

5.1.1 Semi-submerged type table + supplementary table

5.1.2 Full-submerged type table

Pull the supplementary table ④ toward you, and remove it.

Turn the supplementary table stays ⑤ to the left.

(The side cover ③ will now open sufficiently.)

Open the covers.

Lift the auxiliary table ⑥ , and remove it.

Open the covers.

To  prevent  the  supplementary  table  from 

overturning,  first  return  the  supplementary  table 

stays ⑤ to their original position, and then return 

the supplementary table ④ to its original position.

Fig. 5-1

Fig. 5-2

Fig. 5-3

①

②

③

④

⑤

⑥

Содержание VFK2560-8





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды