5
3. ASSEMBLY & SETUP
Stand
I. Assemble stand.
（
Arm jack is combination option
）
1
. Choose a stable location, such as a lab table or countertop. Unpack stand and position base on chosen
surface.
2. Insert support rod into stand base and tighten holding screw.
3. Install lift arm, if applicable, and motor support clamp onto the support rod.
a. Turn the lift arm handle counterclockwise to loosen.
b. Install the lift arm, lock collar and o-ring (Insert o-ring into the collar) onto the support rod.
c. Fit the motor support clamp onto support rod.
Support Rod
Stand Base
Holding Screws
O-Ring
Lock Collar
Lift Arm
Lift Arm Handle
Motor Support Clamp
Unlock
Lock
Be sure the arrow on the lift
arm assembly is pointing up.
Содержание RE201
Страница 2: ......
