![background image](http://html.mh-extra.com/html/yamato/pure-line-we200/pure-line-we200_instruction-manual_905418008.webp)
6
2. PRE-OPERATION PROCEDURES
Installation Precautions
3.
Install in a location free of flammables and explosives.
●
Never install near flammables or explosives. This unit is NOT fire or blast resistant.
Simply switching the main power switch (EL
B) “ON” or “OFF” can produce a spark, which
can
then be relayed during operation, causing a fire or explosion when near flammable
or explosive fluids, chemicals or gases/fumes.
●
See “List of Hazardous Substances” (P.50) for more details on flammable and explosive
gases.
4.
Install on a level surface.
●
Install unit on level and even surface. Failure to do so may cause abnormal vibrations or
noise, resulting in possible complications and/or malfunction.
5.
Connect power cable to proper outlet.
●
Use an outlet which conforms to proper electrical capacity rating (15A or greater).
●
If capacity is inadequate, sample sizes will be too small, or performance will be impaired
due to voltage drop. Connect to a power supply with stable power and proper rating.
Electrical capacity
: WE200 rated voltage: Single phase AC100-240V
Rated frequency: 50/60Hz
Rated maximum current: 1.5A
●
Using a cord reel extension cord may cause voltage to drop.
●
Inserting multiple plugs into a single outlet (with adapter) may cause voltage drop or fire.
Explosive gases
Flammable gases
Содержание Pure Line WE200
Страница 50: ...48 11 WIRING DIAGRAM ...