Yamato Pure Line WE200 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 55

Yamato Pure Line WE200 Скачать руководство пользователя страница 5

3

1. SAFETY PRECAUTIONS

Warning and Cautions

Warning

NEVER operate equipment near combustible gases/fumes.

Do not install or operate WE200 unit near flammable or explosive gases/fumes. Unit is NOT
fire or blast resistant. Negligent use could cause a fire/explosion.

See

“List of Hazardous Substances” (P.50).

ALWAYS ground equipment.

Always ground equipment properly to avoid electric shock.

Connect power cable securely to equipment.

Insert the power cable completely and securely into power socket located on the rear panel
of main unit. A loose power cable connection may cause overheating or fire.

DO NOT operate equipment when abnormalities are detected.

If  smoke  or  unusual  odors  begin  emitting  from  unit,  or  if  any  other  abnormalities  are
detected,  terminate  operation  immediately,  turn  off  main  power  switch  (Earth  Leakage
Breaker  -

“ELB”) and disconnect power cable. Continued operation under such conditions

may result in fire or electric shock.

DO NOT operate equipment with bundled or tangled power cable.

Operating unit with the power cable bundled or otherwise tangled, may cause power cable
to overheat and/or catch fire.

DO NOT damage power cable.

Damaging the power cable by forcibly bending, pulling or twisting may cause fire or electric
shock to the operator.

NEVER disassemble or modify the equipment.

Attempting to dismantle or modify unit in any way, may cause malfunction, fire or electric
shock.

DO NOT place items on equipment.

Do not place any objects on unit. Doing so may cause unit to become unstable and tip over,
resulting in possible equipment damage or personal injury.

DO NOT step on or climb on top of equipment.

Do not attempt to climb onto unit or use as a substitute for a proper step ladder. Unit chassis
is not designed to support bodily weight and damage may result. In addition, unit may
become unstable and tip over or fall resulting in equipment damage, serious injury or death.

«
...
3
4
5
6
7
...
»

Содержание Pure Line WE200
























































Отзывы:

Нет отзывов