Yamato Neocool CF302L-A Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 47

Yamato Neocool CF302L-A Скачать руководство пользователя страница 30

26

6. HANDLING PRECAUTIONS

Warnings and Cautions

Circulation pump.

・

Never operate circulation pump dry. Damage or malfunction may result.

Operating unit without circulating water in the reservoir and circulation pump may cause
seizure of the pump and/or other problems.

・

Keep water reservoir covered and do not allow any debris to enter and remain in the
reservoir. Damage to the pump may result.

・

Do not operate with the circulating path completely closed.

・

Make sure that the flow rate of circulating water keeps at least 1 L/min.

Refrigerator abnormal stop

If room temperature and liquid temperature are high, or the intake dust filter is clogged,
increasing the load of the refrigerator. The refrigerator high-pressure cut-off switch may
operate and stop the refrigeration.

Calibration offset

If there is a deviation between actual temperature of the circulating water and temperature
reading, and adjustment is necessary, refer to "Calibration offset" (P.21) to perform
temperature correction.

Inspect regularly.

ELCB, in particular, is a key device in maintaining this unit safety, and must be
inspected/maintained regularly. See "Inspection and Maintenance" (P.27)

«
...
28
29
30
31
32
...
»

Содержание Neocool CF302L-A
















































Отзывы:

Нет отзывов