background image

 

 

3

 

Cautions in Using with Safety 

Fundamental Matters of "WARNING!" and "CAUTION!" 

 

  WARNING! 

 

 

Do not use this unit in an area where there is flammable or explosive gas 

Never use this unit in an area where there is flammable or explosive gas. This unit is not 
explosion-proof.  An arc may be generated when the power switch is turned on or off, and 
fire/explosion may result. (Refer to page 44 "List of Dangerous Substances".) 

 

 

Always ground this unit

 

Always ground this unit on the power equipment side in order to avoid electrical shock due to a power 
surge. 

 

 

If a problem occurs

 

If smoke or strange odor should come out of this unit for some reason, turn off the power key right 
away, and then turn off the circuit breaker and the main power.  Immediately contact a service 
technician for inspection. If this procedure is not followed, fire or electrical shock may result. Never 
perform repair work yourself, since it is dangerous and not recommended. 

 

 

Do not use the power cord if it is bundled or tangled

 

Do not use the power cord if it is bundled or tangled.    If it is used in this manner, it can overheat and 
fire may be caused. 

 

 

Do not process, bend, wring, or stretch the power cord forcibly

 

Do not process, bend, wring, or stretch the power cord forcibly.    Fire or electrical shock may result. 

 

 

Substances that can not be used

 

Never use explosive substances, flammable substances and substances that include explosive or 
flammable ingredients in this unit. Explosion or fire may occur. (Refer to page 44 "List of Dangerous 
Substances".) 

 

 

Do not disassemble or modify this unit

 

Do not disassemble or modify this unit.    Fire or electrical shock or failure may be caused. 

 

  Do not touch high-temperature parts 

The inside of the body or the door may become hot during and just after operation. It may cause burns. 

 

  CAUTION! 

 

 

During a thunder storm

 

During a thunderstorm, turn off

 

the power key immediately, then turn off the circuit breaker and the main 

power.    If this procedure is not followed, fire or electrical shock may be caused. 

Содержание DP23C
















































Отзывы: