11
AB-6474
Installation procedure: Neosensor on Thermoplate (See Fig. 6.)
1) Attach the mounting plate supplied with Thermoplate to the mounting box cover (switch box mounting dimension:
83.5 mm (JIS C8340:1999)) located inside the wall.
2) Mount Thermoplate on the mounting plate.
3) Install the main part of the Thermoplate mounting kit on Thermoplate.
4) Connect the output lead wires of the Neosensor main unit to the external wires (for the load side). (See Figs. 15 and 16.)
5) Remove the cover from the Neosensor main unit, and mount the main unit on the main part of the Thermoplate mounting
kit with the 4 main-unit accessory screws (M3
×
16). When mounting the main unit onto the Thermoplate mounting kit,
make sure to set the height-adjusting levers on the left and right sides (See Fig. 12) to the upper position (indicated by
"L").
6) Place the cover back on the Neosensor main unit to complete the installation procedure. (See Fig. 8.)
Figure 6. Installation: Neosensor with Thermoplate mounting kit (on Thermoplate)
Output lead wires
Thermoplate
mounting kit
(separate order required)
Thermoplate
(separate order required)
Mounting-box cover
JIS C8340
with 83.5-mm
mounting dimension
(commercially available)
Neosensor
Mounting plate
Main part of Thermoplate mounting kit
Accessory screws
(4 flat-head machine
screws, M3
×
16)
Accessory screws
(2 pan-head machine screws,
M4
×
5)
Accessory screws
(2 tapping screws, M2.6
×
8)
Main unit of Neosensor
Accessory screws
(2 pan-head machine screws, M4
×
8)
Thermoplate
Cover
External wires
(for the load side)
