12
AB-6474
Installation procedure : Neosensor in Multi-Thermocase (See Fig. 7.)
1) Attach the main part of the Multi-Thermocase mounting kit to the device-mounting plate of Multi-Thermocase.
2) Connect the output lead wires of the Neosensor main unit to the external wires (for the load side).
3) Remove the cover from the Neosensor main unit, and set the height-adjusting levers on the left and right sides to the
lower position (indicated by "H"). Then, mount the main unit on the Multi-Thermocase mounting kit with the 4 main-unit
accessory screws (M3
×
16). Neosensor installed in the Multi-Thermocase is used with the cover removed.
IMPORTANT:
When installing Neosensor in the Multi-Thermocase, be sure to set the height-adjusting levers on the
left and right sides of the Neosensor main unit to the lower position (indicated by "H").
Figure 7. Installation: Neosensor (in Multi-Thermocase) with Multi-Thermocase mounting kit
Note:
To mount the Neosensor main unit, set the height-adjusting lever on the left and right sides to the lower position
before fixing the main unit on the Multi-Thermocase mounting kit with the 4 main unit accessory screws.
Device-mounting plate
of Multi-Thermocase
Device-mounting plate
of Multi-Thermocase
Height-adjusting levers
(set to the lower
positions)
Main part of
Multi-Thermocase
mounting kit
Accessory (Multi-Thermocase):
2 pan-head machine screws
(M3
×
6)
Main unit of Neosensor
Accessory: 4 flat-head
machine screws (M3
×
16)
Multi-Thermocase
Multi-Thermocase
mounting kit
(separate order required)
Neosensor
External wires
(for the load side)
