2
AB-6474
Safety Instructions
Please read instructions carefully and use the product as specified in this manual. Be sure to keep this manual nearby
for ready reference.
Usage Restrictions
This product is targeted for general air conditioning. Do not use this product in a situation where human life may be
affected. If this product is used in a clean room or a place where reliability or control accuracy is particularly required,
please contact Yamatake’s sales representatives. Yamatake Corporation will not bear any responsibility for the
results produced by the operators.
CAUTION
•
Installation must be performed by qualified personnel in accordance with all applicable safety standards.
•
This product must be operated within its operating ranges specified in this manual. Failure to comply will
cause equipment damages.
•
Installation must be carried out under the operating conditions specified in this manual to prevent
equipment damages.
•
Always disconnect power source before performing any wiring to prevent equipment damages.
•
All wiring must comply with local codes of indoor wiring and electric installation rules.
•
Do not disassemble the product at any time except when removing the cover to install the product main
unit. Equipment damages may occur.
•
Use crimp terminals with insulation for connecting to the external wires.
•
When the product is faulty, reduced output may cause over-humidification. Provide safety measure on
the controller side.
•
Note that substances contained in gases to be measured, such as corrosive gases and organic solvents,
can cause measurement errors, shortened service life, and malfunctions. If the product is used in non
-standard atmospheric environments, consult with our sales personnel.
•
Do not incinerate this product for waste disposal. Do not recycle all or a part of this product, either.
•
Dispose of the product as an industrial waste complying with the local regulations.
