manualshive.com logo in svg

Yamatake 900 Series, Руководство пользователя

Поделиться
Скачать
Yamatake 900 Series Скачать руководство пользователя страница 22

Safety

Yamatake Corporation

20

ST3000 Smart Transmitter Series 900 Electronic Differential Pressure/Pressure Transmitter

About This Publication

This manual is intended as a detailed “how to” reference for installing, piping wiring, 
configuring, starting up, operating, maintaining, calibrating, and servicing Yamatake’s 
family of ST3000 Smart Transmitters. It is based on using a model SFC160/260 Smart 
Field Communicator as the operator interface for the ST3000 Smart Transmitter. Be 
aware that some data in this manual overlaps information in the field Communicator 
Model SFC160/260 Operating Guide.

While this manual provides detailed procedures to assist first time users, it also 
includes keystroke summaries for most procedures as a quick reference for experi-
enced users.

Precautions

General Precautions

1. Checking the Product

When you accept the ST3000 Smart Transmitter, check its appearance to make sure 
that it is not damaged.

A Smart Transmitter with semi-standard or special specifications may have different 
accessories.

2. Check the specifications

The specifications are marked on the name plate on the outside of the transmitter case. 
Make sure that the specifications match your order by referring to the specifications.

In making an inquiry, identify the model No. and the product No.

3. Transportation

We recommend to transport the transmitter to the installation site in the packaged state 
in order to prevent damages from occurring during transportation.

4. Storage Environment

(1) Storage location

During storage, protect the transmitter from rain water as well as from heavy vibration 
and shock. Store it at normal temperature and humidity (about 25°C, 65%RH) as much 
as possible.

(2) Store the transmitter in original packaging if possible.

(3) If a used transmitter must be stored for some period, wash it thoroughly after mak-

ing sure that no fluid remains in the pressure receiving section.

Содержание 900 Series

































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды