1.
Protect the area around the damage with tape.
2.
Bevel the edges of the damaged area and clean with acetone.
3.
If the damage is deeper than 2 mm, it is advisable to smooth it with an appropriate polyfiller
before painting.
4.
Mix topcoat with 1.5-2% hardener.
5.
Fill the repair with more topcoat than needed, so that its surface remains slightly proud of
the surrounding area.
6.
Carefully put tape over the repair.
7.
After the topcoat has hardened, remove the tape and sand the repair using 600 and 1200
paper applying water.
8.
buff using abrasive paste and wax
The colours used on this boat are specified in the technical specifications. One point to consider is
that a paint called gelcoat has been used in manufacturing the boat, but the surface is always re-
paired with a paint called topcoat. Gelcoat paint does not harden without a mould surface, whereas
paraffin has been added to topcoat to allow it to harden.
NOTE!
Some post-delivery installations and alteration work may cause damage
to the structure of the boat or impair safety if not performed correctly.
Please contact the dealer if you are planning any modifications.
7.10.
Winter storage
Preparing your boat for winter storage is an annual routine. Have your boat lifted in good time be-
fore the water freezes. Your boat is not designed for use in ice and it is not meant to be used in
temperatures below zero (for example, the rain water draining system will freeze up). It is advisable
to perform all maintenance, repair and inspection procedures in connection with placing the boat
in winter storage.
Familiarise yourself with the service procedures shown in the engine manual. We recommend that
you leave them to an authorised service agent. Do not forget to service the remote control and
steering system. Make sure to perform their maintenance according to their separate instructions
and manuals.
7.10.1
Measures before winter storage
Wash the bottom of the boat immediately after the boat has been lifted. Algae and slime will come
off easier if they are not left to dry. Empty the engine of its cooling water according to the manual.
Give the engine and other equipment their winter servicing, following their separate manuals. If
your boat is stored outside or in a humid place over the winter, empty it of textiles and other equip-
ment that may corrode or become mouldy in damp conditions. Wash the ropes in fresh water. Re-
place any worn ropes. Leave bushing valves open. Remove the drain plug for the winter.
Check the condition of the hull and rub down any scrapes
to let possible moisture inside the laminate dry. Repair any damage in the spring before launching
the boat.
Always cover your boat so that snow cannot gather inside. Always make sure, however, that it is ad-
equately ventilated. A winter storage cover is available as an optional accessory for your boat.
Содержание 88 Day Cruiser
