Yamaha YW50AP, Руководство по обслуживанию

Страница: 151 / 214

6-32
CHAS
3. Install:
8
Front fork assembly
1
8
Ball race (Upper)
2
8
Bearing cover
3
8
Ring nut 3
4
8
Rubber washer
5
8
Ring nut 2
6
8
Special washer
7
8
Ring nut 1
8
NOTE:
Securely support the steering shaft so that
there is no danger of it falling down.
4. Tighten:
8
Ring nuts
***************************************
Tighten steps:
8
Tighten the ring nut 3
2
using the ring nut
wrench
1
22 Nm (2.2 m.kg, 16 ft.lb)
Steering mut wrench:
YU-33975
NOTE:
Set the torque wrench
3
to ring nut wrench
1
so that they form right angle.
w
Do not over-tightening.
8
Loosen the ring nut 3
2
1/4 turn.
8
Check the front fork by turning it lock to lock.
If there is any binding, remove the front fork
assembly and inspect the steering ball bear-
ings and ball races.
8
Install rubber washer
4
and ring nut 2
5
,
then turn the ring nut 2 until it contacts with
rubber washer.
STEERING
8
7
6
5
4
3
2
1
3
2
1
7
6
5
4
2
T
R
.
.