Yamaha YDX-MORO Pro, Инструкция по сборке

Страница: 6 / 20

INSTALLING THE INCLUDED PARTS
– 4 –
7
9
INSTALLING THE INCLUDED
PARTS
TIP
8
Charge the battery pack following the instruc-
tions in the owner’s manual before starting
installation.
8
The letters inside the parts list boxes in the
assembly procedures indicate the following:
A: Part in part box 1
B: Part in part box 2
1. Installing the front wheel and fork end
Remove the spacers
b
from the front disc cali-
per
a
.
Give the removed spacers
b
to the customer,
explaining how it is used.
(For YDX-MORO Pro)
Align the holes in the front wheel
1
with the
holes in the fork end and install the front wheel
1
.
Install it in such a way that the disc rotor
c
does
not touch the disc pad.
Install the front axle
2
to the fork end holes
from the right side of the bicycle.
Tighten the bolts and nuts to the specified
torques. Failure to tighten the bolts and nuts to
the specified torques could prevent proper
operation of the bicycle and make it unsafe to
operate.
WARNING
a
b
a
c
1
2
1
Front wheel 1
2
Front axle 1 A
X1V-28107-10.book 4 ページ ２０２０年８月３日 月曜日 午後４時１１分