Yamaha YDX-MORO Pro, Инструкция по сборке, Страница: 19 / 20

PREDELIVERY INSPECTION
– 17 –
79
PREDELIVERY INSPECTION
8
Handlebar orientation, height, angle, and tightening
8
Saddle orientation, height, angle, and tightening
* Check that the saddle is firmly fastened.
8
Various fittings adjusted to the customer’s riding posture
* Including brake lever angle, fork suspension air pressure, etc.
8
Inspection of the wheels, hubs, and spokes
8
Tightening of the pedals
8
Tightening of the screws of each part
8
Brake performance
8
Shift changing operation
8
Looseness of the chain
8
Bell sound
8
Battery pack locking operation
* Check that the battery pack locks securely.
8
Check of battery pack and battery charger operation
8
Operation of the meter, switches, and drive unit
8
Installation state of the reflectors
8
Maximum tire air pressure
Front tire: 450 kPa (4.5 kgf/cm
2
, 65 psi)
Rear tire: 450 kPa (4.5 kgf/cm
2
, 65 psi)
After completing the installation, inspect the items as follows and check that there are no problems
before delivering the bicycle. Adjust controls and saddle height to the customer’s satisfaction
according to this manual.
WARNING
X1V-28107-10.book 17 ページ ２０２０年８月３日 月曜日 午後４時１１分