Yamaha YDX-MORO Pro, Инструкция по сборке

Страница: 7 / 20

INSTALLING THE INCLUDED PARTS
– 5 –
79
Tighten the front axle
2
to the specified torque.
(For YDX-MORO)
Align the holes in the front wheel
1
with the
holes in the fork end and install the front wheel
1
.
Install it in such a way that the disc rotor
c
does
not touch the disc pad.
Install the front axle
2
to the fork end holes
from the right side of the bicycle.
Move the lever
d
of the front axle
2
to “OPEN”
facing the notch
e
.
With the lever
d
caught in the notch
e
, turn
and tighten until there is a little resistance in the
lever.
Free the lever
d
.
Determine the position to secure the lever
d
and fasten it at “CLOSE”.
2
Tightening tor qu e 11 N·m (1.1 kgf·m, 8.1 l b ·ft)
Tighten the front axle
2
to the specified torque
and install it securely. Otherwise, the front
wheel could come off.
WARNING
a
c
1
2
1
Front wheel 1
2
Front axle 1 A
e
d
d
d
X1V-28107-10.book 5 ページ ２０２０年８月３日 月曜日 午後４時１１分