Yamaha YDRE, Руководство владельца/оператора

Страница: 20 / 208

1
2
3
4
5
6
7
8
9
10
11
CONTROLS
4-3
JC1
As the battery energy decreases,
the LED will move to the left toward
the “0.” When the LED light below
the “0” is lit, the batteries must be
charged.
DRIVE SELECT SWITCH
The drive select switch is used to
shift the PTV into forward or reverse.
After coming to a complete stop,
move the switch to the desired
position.
Switch Position Car Movement
FWD FORWARD
REV REVERSE
TIP
The reverse alarm will sound when
the drive select switch is depressed
to the “REV” position.
ACCELERATOR PEDAL
The accelerator pedal controls the
PTV’s speed.
Action Car Speed
Depress pedal Increase
Release pedal Decrease
å
Accelerator pedal
Y-92 0 a
B EEP
Y-2 0A
A
REV F W D
Y-22 7 3
OFF ON ON
DEATH OR SEVERE PERSONAL INJURY CAN RESULT FROM FAILURE TO FOLLO W THESE INSTRUCTIONS.
• Read the label located on the steering wheel before operation.
• Operate only when authori z ed and only in designated areas.
• Operate from driver’s side only.
• Do not allow more than two occupants per seat.
• Do not start vehicle until all occupants are seated.
• Remain seated and hold on when in motion.
• K eep entire body inside vehicle.
• Drive slowly in turns.
• Drive slowly straight up and down slopes.
• Set parking brake before leaving vehicle.
• Turn main switch to “ OFF ” and remove key when not in use.
• Do not operate while under the influence of alcohol or drugs.
YAMAHA
W ARNIN G
JC1 - K77 68- 00
0 1
-
Y-22 74
0
1
-
JC1_F8199_70_ENG.qxp_LIT_19626_00_81.qxd 10/17/14 4:12 PM Page 15