Yamaha XV19SW 2006, Руководство по обслуживанию

Страница: 45 / 145

TIGHTENING TORQUES
2-20
NOTE:
• Tighten the connecting rod bolts to 15 Nm (1.5 m·kg, 11 ft·lb), and then tighten them further to reach
the specified angle 125–135°.
• Install the crankcase stud bolts (M12) so that their installed length is 141.5 mm (5.57 in).
• Install the crankcase stud bolts (M10) so that their installed length is 70.5 mm (2.78 in).
Dipstick joint bolt M6 2 10 Nm (1.0 m·kg, 7.2 ft·lb)
Drive pulley case bolt M10 8 70 Nm (7.0 m·kg, 50 ft·lb)
Oil strainer bolt (oil tank) M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Oil pipe 5 bolt M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Transfer gear case cover plate
bolt
M6 3 5 Nm (0.5 m·kg, 3.6 ft·lb)
Transfer gear case cover bolt M6 12 10 Nm (1.0 m·kg, 7.2 ft·lb)
Oil tank cover bolt M6 15 10 Nm (1.0 m·kg, 7.2 ft·lb)
Oil tank bracket bolt M8 2 28 Nm (2.8 m·kg, 20 ft·lb)
Shift shaft spring stopper bolt M8 1 22 Nm (2.2 m·kg, 16 ft·lb)
Stopper lever bolt M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Crankshaft position sensor screw M6 2 10 Nm (1.0 m·kg, 7.2 ft·lb)
Neutral switch screw M6 2 4 Nm (0.4 m·kg, 2.9 ft·lb)
Stator coil screw M6 3 10 Nm (1.0 m·kg, 7.2 ft·lb)
Neutral switch lead clamp screw M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Speed sensor bolt M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Oil cooler bolt M6 1 7 Nm (0.7 m·kg, 5.1 ft·lb)
Oil cooler bracket bolt M6 2 7 Nm (0.7 m·kg, 5.1 ft·lb)
Oil cooler hose bolt M6 8 7 Nm (0.7 m·kg, 5.1 ft·lb)
Clutch hose union bolt M10 2 30 Nm (3.0 m·kg, 22 ft·lb)
Clutch pipe union bolt M10 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Clutch pipe holder bolt M6 2 7 Nm (0.7 m·kg, 5.1 ft·lb)
Clutch pipe joint nut M10 1 19 Nm (1.9 m·kg, 13 ft·lb)
Item
Thread
size
Q’ty Tightening torque Remarks
LT
LT
LT
LT
LT
LT
LT
LT
LT
LT