manualshive.com logo in svg

Yamaha XMAX 250 YP250R, Руководство пользователя, Страница: 55 / 68

Поделиться
Скачать
Yamaha XMAX 250 YP250R Скачать руководство пользователя страница 55

Rear turn signal light bulb

1. Remove the tail/brake light lens

by removing the screw.

2. Remove the turn signal light bulb

lens by removing the screw.

3. Remove the defective bulb by

pushing it in and turning it coun-
terclockwise.

4. Insert a new bulb into the socket,

push it in, and then turn it clock-
wise until it stops.

5. Install the turn signal light bulb

lens by installing the screw.

6. Install the tail/brake light bulb

lens by installing the screw.

ECA10680

CAUTION

Do not overtighten the screws,
otherwise the lens may break.

EAUS1150

Replacing the license plate
light bulb

1. Remove the lens by removing the

screw.

2. Remove the defective bulb by

pulling it out.

3. Insert a new bulb into the socket.
4. Install the lens by installing the

screw.

ECA11190

CAUTION

Do not overtighten the screw,
otherwise the lens may break.

EAUS1260

Replacing the auxiliary light
bulb

If the auxiliary light bulb burns out,
replace it as follows.

1. Remove cowling B . (See page 

6-5.).

2. Remove the socket (together

with the bulb) by pulling it out.

3. Remove the defective bulb by

pulling it out.

6

PERIODIC MAINTENANCE AND MINOR REPAIR

6-22

1C0-F8199-E0.qxd  13/04/2005 16:58  Página 55

Содержание XMAX 250 YP250R





































































Отзывы:

Нет отзывов