Yamaha XMAX 250 YP250R Скачать руководство пользователя страница 23

Страница: 23 / 68

2. Insert the key into the lock and

turn it 1/4 turn counterclockwise.
The lock will be released and the
fuel tank cap can be removed.

To install the fuel tank cap

1. Push the fuel tank cap into posi-

tion with the key inserted in the
lock.

2. Turn the key clockwise to the ori-

ginal position, and then remove
it.

3. Close the lock cover

NOTE:

The fuel tank cap cannot be installed
unless the key is in the lock. In addition,
the key cannot be removed if the cap is
not properly installed and locked.

EWA11140

WARNING

Make sure that the fuel tank cap is
properly installed before riding.

EAU13230

Fuel

Make sure that there is sufficient fuel
in the tank.

1. Filler tube
2. Fuel level

EWA10990

WARNING

Since gasoline is flammable, the
following precautions must be
observed.

●

Stop the engine before refue-
ling.

●

Never attempt to refuel the
scooter while smoking or near
an open flame.

●

Take special care not to spill
gasoline over the engine or
muffler when refueling imme-
diately after operation.

●

Before starting the engine,
quickly wipe off any gasoline
spilled on the engine or muffler.

ECA10070

CAUTION

Immediately wipe off spilled fuel
with a clean, dry, soft cloth, since
fuel may deteriorate painted surfa-
ces or plastic parts.

EAU33500

Recommended fuel:

REGULAR UNLEADED GASOLINE
ONLY

Fuel tank capacity:

12L (2,64US gal) (10,55Imp gal)

Fuel reserve amount (when the fuel
level warning symbol comes on):

2L (0,44 US gal) (1,76 Imp gal)

INSTRUMENT AND CONTROL FUNCTIONS

3-9

1C0-F8199-E0.qxd 13/04/2005 16:58 Página 3-9

Содержание XMAX 250 YP250R





































































Результаты поиска

Содержание XMAX 250 YP250R

Отзывы:

Yamaha XMAX 250 YP250R, Руководство пользователя, Страница: 23 / 68

Результаты поиска

Содержание XMAX 250 YP250R

Отзывы: