manualshive.com logo in svg

Yamaha XMAX 250 YP250R, Руководство пользователя, Страница: 53 / 68

Поделиться
Скачать
Yamaha XMAX 250 YP250R Скачать руководство пользователя страница 53

3. Turn the key to “ON” and turn on

the electrical circuit in question to
check if the device operates.

4. If the fuse immediately blows

again, have a Yamaha dealer
check the electrical system.

EAU23910

Replacing a headlight bulb

This model is equipped with quartz
bulb headlights. If a headlight bulb
burns out, replace it as follows.

1. Remove cowling B. (See page 

6-5.)

1. Headlight coupler

2. Disconnect the headlight coupler,

and then remove the headlight
bulb cover.

3. Remove the headlight bulb hol-

der according to the following
illustration, and then remove the
defective bulb.

1. Headlight bulb cover

NOTE:

The removal procedure depends on
the type of bulb holder installed on
your vehicle.

EWA10790

s

s

WARNING

Headlight bulbs get very hot. The-
refore, keep flammable products
away from a lit headlight bulb, and
do not touch the bulb until it has
cooled down.

4. Place a new bulb into position,

and then secure it with the bulb
holder.

ECA10660

CAUTION

Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the
bulb, and the bulb life will be adver-
sely affected. Thoroughly clean off

1

1

1

6

PERIODIC MAINTENANCE AND MINOR REPAIR

6-20

1C0-F8199-E0.qxd  13/04/2005 16:58  Página 53

Содержание XMAX 250 YP250R





































































Отзывы:

Нет отзывов