manualshive.com logo in svg

Yamaha XMAX 250 YP250R, Руководство пользователя, Страница: 17 / 68

Поделиться
Скачать
Yamaha XMAX 250 YP250R Скачать руководство пользователя страница 17

If the warning light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical
circuit.

EAUS1310

Immobilizer system indicator light 

The electrical circuit of the indicator
light can be checked by turning the
key to “ON”.
If the indicator light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical
circuit.
When the key is turned to “OFF”, the
indicator light will start flashing indi-
cating the immobilizer system is ena-
bled. After 24 hours have passed, the
indicator light will stop flashing,
however the immobilizer system is
still enabled.
This model is also equipped with a
self-diagnosis device for the immobi-
lizer system.

EAU11591

Speedometer

1. Fuel level gauge
2. High bearn indicator light
3. Left turning signal light
4. Right turning signal light
5. Coolant temperature gauge

The speedometer shows the riding
speed.

EAU12110

Fuel gauge

1. Fuel gauge
2. Fuel warning light

The fuel gauge indicates the amount
of fuel in the fuel tank. The needle
moves towards “E” (Empty) as the
fuel level decreases. When the needle
reaches “E”, approximately 2.0L
(0.44USgal) (1.76Imp.gal) of fuel
remain in the fuel tank. If this occurs,
refuel as soon as possible.

NOTE:

Do not allow the fuel tank to empty
itself completely.

1

2

1 2 3

4

5

3

INSTRUMENT AND CONTROL FUNCTIONS

3-3

1C0-F8199-E0.qxd  13/04/2005 16:58  Página 3-3

Содержание XMAX 250 YP250R





































































Отзывы:

Нет отзывов