manualshive.com logo in svg

Yamaha XMAX 250 YP250R, Руководство пользователя, Страница: 49 / 68

Поделиться
Скачать
Yamaha XMAX 250 YP250R Скачать руководство пользователя страница 49

●

Be careful that water does not
enter the brake fluid reservoir
when refilling. Water will signifi-
cantly lower the boiling point of
the fluid and may result in vapor
lock.

●

Brake fluid may deteriorate pain-
ted surfaces or plastic parts.
Always clean up spilled fluid
immediately.

●

As the brake pads wear, it is nor-
mal for the brake fluid level to
gradually go down. However, if
the brake fluid level goes down
suddenly, have a Yamaha dealer
check the cause.

EAUM1360

Changing the brake fluid

Have a Yamaha dealer change the
brake fluid at the intervals specified in
the periodic maintenance and lubrica-
tion chart. In addition, have the brake
hose replaced every four years or
whenever it is damaged or leaking.

EAU23111

Checking and lubricating the
throttle grip and cable

The operation of the throttle grip
should be checked before each ride.
In addition, the cable should be lubri-
cated at the intervals specified in the
periodic maintenance chart.

EAU23170

Lubricating the front and
rear brake levers

The pivoting points of the front and
rear brake levers must be lubricated
at the intervals specified in the perio-
dic maintenance and lubrication
chart.

EAU23211

Checking and lubricating the
centerstand and sidestand

The operation of the centerstand and
sidestand should be checked before
each ride, and the pivots and metal-
to-metal contact surfaces should be
lubricated if necessary.

Recommended lubricant:

Lithium-soap-based grease (all-
purpose grease)

6

PERIODIC MAINTENANCE AND MINOR REPAIR

6-16

1C0-F8199-E0.qxd  13/04/2005 16:58  Página 49

Содержание XMAX 250 YP250R





































































Отзывы:

Нет отзывов