Yamaha XMAX 250 YP250R Скачать руководство пользователя страница 22

Страница: 22 / 68

NOTE:

Even if the key is turned from “

” to

“

” with the hazard lighting on, the

hazard lighting will continue to flash
regardless of the hazard switch posi-
tion. To cancel the hazard lighting, the
key must be turned to “

” and the

hazard switch must be set to the “

”

position.

The hazard lighting is used in case of
an emergency or to warn other drivers
when your scooter is stopped where
it might be a traffic hazard.

ECA10060

CAUTION

Do not use the hazard light for an
extended length of time, otherwise
the battery may discharge.

EAU12900

Front brake lever

1. Front brake lever

The front brake lever is located on the
right handlebar grip. To apply the
front brake, pull this lever toward the
handlebar grip.

EAU12950

Rear brake lever

1. Rear brake lever

The rear brake lever is located on the
left handlebar grip. To apply the rear
brake, pull this lever toward the hand-
lebar grip.

EAUM2080

Fuel tank cap

To remove the fuel tank cap

1. Open the fuel tank cap lock

cover.

INSTRUMENT AND CONTROL FUNCTIONS

3-8

1C0-F8199-E0.qxd 13/04/2005 16:58 Página 3-8

Содержание XMAX 250 YP250R





































































Результаты поиска

Содержание XMAX 250 YP250R

Отзывы:

Yamaha XMAX 250 YP250R, Руководство пользователя, Страница: 22 / 68

Результаты поиска

Содержание XMAX 250 YP250R

Отзывы: