manualshive.com logo in svg

Yamaha WR450Fv2008, Руководство по эксплуатации для владельца

Yamaha WR450Fv2008 - владельцев сервисное руководство. Скачайте руководство бесплатно с нашего сайта. Этот мануал поможет вам поддерживать и обслуживать ваш мотоцикл в отличном состоянии. Необходимая информация для владельцев Yamaha WR450Fv2008 доступна для скачивания на manualshive.com.

Поделиться
Скачать
background image

FOREWORD

INTRODUCTION

Congratulations on your purchase of 
a Yamaha WR series. This model is 
the culmination of Yamaha's vast ex-
perience in the production of paceset-
ting racing machines. It represents 
the highest grade of craftsmanship 
and reliability that have made Yama-
ha a leader.
This manual explains operation, in-
spection, basic maintenance and tun-
ing of your machine. If you have any 
questions about this manual or your 
machine, please contact your Yama-
ha dealer.

Yamaha continually seeks advance-
ments in product design and quality. 
Therefore, while this manual contains 
the most current product information 
available at the time of printing, there 
may be minor discrepancies between 
your machine and this manual. If you 
have any questions concerning this 
manual, please consult your Yamaha 
dealer.

PLEASE READ THIS MANUAL 
CAREFULLY AND COMPLETELY 
BEFORE OPERATING THIS MA-
CHINE. DO NOT ATTEMPT TO OP-
ERATE THIS MACHINE UNTIL YOU 
HAVE ATTAINED A SATISFACTO-
RY KNOWLEDGE OF ITS CON-
TROLS AND OPERATING 
FEATURES AND UNTIL YOU HAVE 
BEEN TRAINED IN SAFE AND 
PROPER RIDING TECHNIQUES. 
REGULAR INSPECTIONS AND 
CAREFUL MAINTENANCE, 
ALONG WITH GOOD RIDING 
SKILLS, WILL ENSURE THAT YOU 
SAFETY ENJOY THE CAPABILI-
TIES AND THE RELIABILITY OF 
THIS MACHINE.

PARTICULARLY IMPORTANT 
INFORMATION

The Safety Alert Symbol means AT-
TENTION! BECOME ALERT! YOUR 
SAFETY IS INVOLVED!

Failure to follow WARNING instruc-
tions could result in severe injury or 
death to the machine operator, a by-
stander, or a person inspecting or re-
pairing the machine.

A CAUTION indicates special pre-
cautions that must be taken to avoid 
damage to the machine.

A NOTE provides key information to 
make procedures easier or clearer.

IMPORTANT NOTICE

THIS MACHINE IS DESIGNED 
STRICTLY FOR COMPETITION 
USE, ONLY ON A CLOSED 
COURSE.  It is illegal for this machine 
to be operated on any public street, 
road, or highway. Off-road use on 
public lands may be illegal. Please 
check local regulations before riding.

1. THIS MACHINE IS TO BE OP-

ERATED BY AN EXPERI-
ENCED RIDER ONLY.
Do not attempt to operate this 
machine at maximum power 
until you are totally familiar 
with its characteristics.

2. THIS MACHINE IS DESIGNED 

TO BE RIDDEN BY THE OP-
ERATOR ONLY.
Do not carry passengers on 
this machine.

3. ALWAYS WEAR PROTEC-

TIVE APPAREL.
When operating this ma-
chine, always wear an ap-
proved helmet with goggles 
or a face shield. Also wear 
heavy boots, gloves, and pro-
tective clothing. Always wear 
proper fitting clothing that 
will not be caught in any of 
the moving parts or controls 
of the machine.

4. ALWAYS MAINTAIN YOUR 

MACHINE IN PROPER 
WORKING ORDER.
For safety and reliability, the 
machine must be properly 
maintained. Always perform 
the pre-operation checks in-
dicated in this manual. Cor-
recting a mechanical problem 
before you ride may prevent 
an accident.

5. GASOLINE IS HIGHLY FLAM-

MABLE.
Always turn off the engine 
while refueling. Take care to 
not spill any gasoline on the 
engine or exhaust system. 
Never refuel in the vicinity of 
an open flame, or while 
smoking.

6. GASOLINE CAN CAUSE IN-

JURY.
If you should swallow some 
gasoline, inhale excess gaso-
line vapors, or allow any gas-
oline to get into your eyes, 
contact a doctor immediately. 
If any gasoline spills onto 
your skin or clothing, imme-
diately wash skin areas with 
soap and water, and change 
your clothes.

7. ONLY OPERATE THE MA-

CHINE IN AN AREA WITH AD-
EQUATE VENTILATION.
Never start the engine or let it 
run for any length of time in 
an enclosed area. Exhaust 
fumes are poisonous. These 
fumes contain carbon mon-
oxide, which by itself is odor-
less and colorless. Carbon 
monoxide is a dangerous gas 
which can cause uncon-
sciousness or can be lethal.

8. PARK THE MACHINE CARE-

FULLY; TURN OFF THE EN-
GINE.
Always turn off the engine if 
you are going to leave the 
machine. Do not park the ma-
chine on a slope or soft 
ground as it may fall over.

9. THE ENGINE, EXHAUST 

PIPE, MUFFLER, AND OIL 
TANK WILL BE VERY HOT 
AFTER THE ENGINE HAS 
BEEN RUN.
Be careful not to touch them 
or to allow any clothing item 
to contact them during in-
spection or repair.

Содержание WR450Fv2008





























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для WR450Fv2008

ACERBIS STEEL CARBON User Manual preview
STEEL CARBON
Бренд: ACERBIS Страницы: 72
yasuni TUB225 Assembly Instructions Manual preview
TUB225
Бренд: yasuni Страницы: 12
X-lite X-402 T Safety And Instructions For Use preview
X-402 T
Бренд: X-lite Страницы: 96
TRS One 250 2016 User Manual preview
One 250 2016
Бренд: TRS Страницы: 38
Lincoln Electric VIKING 3250D FGS Operator'S Manual preview
VIKING 3250D FGS
Бренд: Lincoln Electric Страницы: 56
N-Com SPCOM00000069 Quick Start Manual preview
SPCOM00000069
Бренд: N-Com Страницы: 2
Bajaj Pulsar 135 BS VI Owner'S Manual preview
Pulsar 135 BS VI
Бренд: Bajaj Страницы: 48
Honda VT250-FII Owner'S Manual preview
VT250-FII
Бренд: Honda Страницы: 190
Honda 1999 Shadow Aero VT1100C3 Owner'S Manual preview
1999 Shadow Aero VT1100C3
Бренд: Honda Страницы: 226
RPS Falcon 200 Owner'S Manual preview
Falcon 200
Бренд: RPS Страницы: 28
oset MX-10 Mk.1 Owner'S Manual preview
MX-10 Mk.1
Бренд: oset Страницы: 44
KTM 690 Enduro AUS 2010 Repair Manual preview
690 Enduro AUS 2010
Бренд: KTM Страницы: 265
KTM 525 XC Owner'S Manual preview
525 XC
Бренд: KTM Страницы: 207
Ice Bear PST300-20 Manual preview
PST300-20
Бренд: Ice Bear Страницы: 64
hepco & becker 5054558 00 01 Manual preview
5054558 00 01
Бренд: hepco & becker Страницы: 4
Faller 190119/1 Manual preview
190119/1
Бренд: Faller Страницы: 8
Magna VF750C Manual preview
VF750C
Бренд: Magna Страницы: 223
Healtech iLogger easy Supplementary Manual preview
iLogger easy
Бренд: Healtech Страницы: 5

Бренды по названию

Популярные бренды

Загрузить еще бренды