Yamaha VK540EF, Руководство по обслуживанию

Страница: 146 / 439

3-4
STEERING
CHAS
NOTE:
CAUTION:
CAUTION:
NOTE:
ESS00107
INSTALLATION
1. Install:
Tie-rod 1
Relay rod 2
Install the rod end 3 with the left-hand thread
onto the tie-rod on the right side.
The threads on both
a
rod ends must be the
same length.
Always use new cotter pins.
Locknut (rod end):
25 Nm (2.5 m kg, 18 ft lb)
LOCTITE

Nut (suspension arm-tie-rod):
43 Nm (4.3 m kg, 31 ft lb)
2. Apply
Low temperature lithium soap base grease
(to bearing inner surface)
3. Tighten:
Bearing holder nut:
19 Nm (1.9 m kg, 14 ft lb)
Bearing holder bolt:
27 Nm (2.7 m kg, 20 ft lb)
Relay rod nut:
43 Nm (4.3 m kg, 31 ft lb)
Always use a new lock washer and cotter
pin.
Bend the lock washer top along the bolts and
nuts flats.