Yamaha V50 Скачать руководство пользователя страница 96

Страница: 96 / 161

EDIT FUNCTIONS

Here you can do various editing operations on each track
of a song.

In sequencer play mode, select the song to edit, and
press to get the following display.

Press the below “ > Edit” to get the following

display.

Pressing the below “ > EXIT” will return to the
previous display.

Track mix down

Press the below “ > Mix”.

Function

Mix down (combine) the data of two tracks into one
track.

Settings

1 - 8 (select track)

Explanation

This will mix the data of two different tracks and put

it in a single track. For example, if you had recorded

a piano part by playing each hand separately into

different tracks, you could use this function to com-

bine the two tracks into a single track.

The first two “Tr” numbers are the source tracks.

The third “Tr” is the destination track. After speci-
fying the three tracks, press the below “ > GO”.
Press in response to the confirming message,

and track mix down will be executed.

Note:

Once you have mixed down two tracks, you will no
longer be able to play them with separate voices.
Also, the previous data will be erased.

Quantize

Press the below “Qntz”.

Function

Correct each note to the nearest specified timing.

Settings

l – 8 (select track), 1/48, 1/32, 1/16, l/12, l/8, l/6,
l/4 (size)

Explanation

Quantization will move the start timing of each note
to the nearest interval of the specified value.

The following diagram is an example of a track

recorded in realtime, and played with inaccurate
timing.

The notes on the second and third beat are slightly

out of time. Quantize can be used to correct such

notes. If we set “Size” to “l/4” and execute this

quantize function, the notes will be moved to the

nearest beat of “l/4”, as follows.

“Size” is the smallest time value that will be allowed
to remain after this operation is executed. This means
that if you intended your music to contain 16th notes,

you should specify 1/16. If you quantized using 1/8,

some of the 16th notes might be moved to the nearest
8th note. (The length of the notes will remain un-
changed.)

After specifying the track and size, press the

below “ > GO”. Press in reply to the

confirming message, and quantize will be executed.

Note:

It is not possible to reverse the effects of quantization.

If your music contains triplets, use a quantization
value such as 1/6, 1/12, or 1/24.

Using the sequencer

Содержание V50


































































































































































Результаты поиска

Содержание V50

Отзывы:

Похожие инструкции для V50

Бренды по названию

Популярные бренды

Yamaha V50, Уполномоченное руководство по продукции

Результаты поиска

Содержание V50

Отзывы:

Похожие инструкции для V50

Бренды по названию

Популярные бренды