Yamaha V50, Уполномоченное руководство по продукции

Страница: 102 / 161

Note:
Sequencer data cannot be saved to card.
Save
This is where you save data to a card. This function does
not allow you to save individual voices or performances
to card. (To store individual voices or performances,
use the “store” function explained on page 119.)
Two complete sets of rhythm data (all rhythm patterns,
all songs, and rhythm machine setup data) will fit in a
single bank of a card. When saving rhythm machine data
to card, specify whether to save or load “A” or “B”.
Synthesizer data occupies an entire bank of a card.
Note:
If the write protect switch on the RAM card is “on”,
or the memory protect setting (card) is “on”, you
will get a “Memory Protected” display, and save will
not be executed.
Data will be saved into the selected bank, over-
writing any data which may have been in that bank.
Be careful not to overwrite important data by mistake.
You cannot save to a bank which has not been
formatted.
You cannot save to a ROM card.
Rhythm machine data
Data type Abbreviation
Rhythm all data ALL
Rhythm sequence data R.SEQ
Rhythm setup data SETUP
Contents
Rhythm pattern data (100 patterns)
Rhythm song data (8 songs)
Rhythm setup data
Rhythm pattern data (100 patterns)
Rhythm song data (8 songs)
Rhythm setup data
(1) Press to get the following display.
(2) Specify the bank into which to save data. When using
an MCD32, select 1. When using an MCD64, select
1 or 2. The format of the selected bank will be dis-
played under “Format”. When saving synthesizer
data, be sure to select a bank that has been formatted
to “V50SYN”. When saving rhythm machine data,
be sure to select a bank that has been formatted to
“V50RHY”.
(3) Press the below“ > Save” to get the following
display.
You can press the below “ > EXIT” to return
to the previous display.
(4) Press the to select the type of data to save.
Synth . . . . . . . . . Save synthesizer data.
Rhythm to (A) .. Save rhythm machine data to
bank section A
Rhythm to (B).... Save rhythm machine data to
bank section B
If you have selected “Synth”, the following display
will appear.
If you have selected “Rhythm(A)” or “Rhythm(B)“,
the following display will appear.
(5) Press a to select the type of data to save. The
chart on page 96-97 explains the contents of each
type. You will get a message of “Are you sure?”
(6) Press and the specified data will be saved to
the selected bank of the card.
Utility functions 97