Yamaha V50 Скачать руководство пользователя страница 124

Страница: 124 / 161

Voice store

STORE FUNCTIONS

From single play mode, press

to get the

following display.

Function

Store a voice to internal or card memory.

Explanation

Store the currently selected voice as an internal voice
or card voice.

While continuing to press

specify

the voice number to store.

Press or to select internal or card

memory. When you have input the store destination,
release You will be asked “OK?”,
and when you press the voice will be stored.

Note:

When internal memory protect is on, the right edge

of the display will show “Prot?”(protect), and by
pressing the below it, you can temporarily de-
feat protect.

When card memory protect is on, or when the

card memory protect slider is on, voices cannot be
saved to card memory.

Voices cannot be stored in a card that has not

been formatted.

Performance store

From performance play mode, press to
get the following display.

Function

Store a performance to internal or card memory.

Explanation

Store the currently selected performance as an internal
performance or card performance.

While continuing to press specify

the performance number to store. Press o r

to select internal or card memory. When

you have input the store destination, release

You will be asked “OK?”, and when

you press the performance will be stored.

Note:

When internal memory protect is on, the right edge
of the display will show “Prot?” (protect), and by
pressing the below it, you can temporarily de-
feat protect.

When card memory protect is on, or when the

card memory protect slider is on, performances cannot
be saved to card memory.

Performances cannot be stored in a card that has

not been formatted.

Voice store when using voice edit

When you have finished editing, press and

then to get the following display.

Function

Store after using the voice edit function.

Explanation

You will get a blinking message “which voice?”.
While continuing to press press the

below the voice you want to store. Specify the

voice number destination, and release

You will be asked “OK?”, so press

If you want to store other voices, repeat this

proceedure.

Note:

When the card memory protect slider is on, voices

cannot be saved to card memory.

Voices cannot be stored in a card that has not

been formatted.

If you have entered this function from internal

performance, voices can be stored only in internal
memory. If from card, only in card memory.

Storing using the voice edit function is possible

only in the voice edit display.

Utility functions

119

Содержание V50


































































































































































Результаты поиска

Содержание V50

Отзывы:

Похожие инструкции для V50

Бренды по названию

Популярные бренды

Yamaha V50, Уполномоченное руководство по продукции

Результаты поиска

Содержание V50

Отзывы:

Похожие инструкции для V50

Бренды по названию

Популярные бренды