Yamaha TZ125M1, Руководство по эксплуатации для владельца

Страница: 74 / 257

FRONT FORK TOP END ADJUSTMENT
3-24
• Adjust the front fork top end
a
.
Front fork top end
a a
:
Standard Extent of adjustment
18 mm (0.71 in)
Zero~20 mm
(Zero~0.79 in)
≠
CC CAUTION:
Never attempt to install the front fork
beyond the maximum or minimum set-
ting.
W
Always adjust each front fork to the
same setting. Uneven adjustment can
cause poor handling and loss of stabili-
ty.
• Tighten the pinch bolts (handle crown and
under bracket).
Pinch bolt (handle crown):
15 Nm (1.5 m•kg, 11 ft•lb)
Pinch bolt (under bracket):
20 Nm (2.0 m•kg, 14 ft•lb)
¶
CC
CAUTION:
Tighten the under bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
• Adjust the handlebar position
b
and steer-
ing damper stay position
c
.
Handlebar position
b b
:
20 mm (0.79 in)
Steering damper stay position
c c
:
Zero mm (Zero in)
§
• Tighten the pinch bolts (handle bracket
and steering damper stay).
Pinch bolt (handle bracket):
8 Nm (0.8 m•kg, 5.8 ft•lb)
Pinch bolt (steering damper stay):
7 Nm (0.7 m•kg, 5.1 ft•lb)
¶
INSP
ADJ