Yamaha TZ125M1, Руководство по эксплуатации для владельца

Страница: 122 / 257

CLUTCH
4-34
9. Install:
• Pressure plate
1
NOTE:
Align the punch mark
a
on the pressure plate
with the punch mark
b
on the clutch boss.
10.Install:
• Clutch spring
1
• Screw (clutch spring)
2
T
6 Nm (0.6 m
d
kg, 4.3 ft
d
lb)
NOTE:
Tighten the screws in stages, using a criss-
cross pattern.
11. Check:
• Push lever position
Push the push lever
1
forward until it
stops. With the push lever in this position,
the projection
a
of the push lever should
be aligned with the mating mark
b
on the
crankcase.
Not aligned
≥
Adjust.
12.Adjust:
• Push lever position
Push lever position adjustment steps:
• Loosen the locknut
1
.
• Turn the adjuster
2
to align the projection
of the push lever with the mating mark on
the crankcase.
• Tighten the locknut.
T
Locknut:
6 Nm (0.6 m•kg, 4.3 ft•lb)
ENG