Yamaha TT-R125(N), Руководство по эксплуатации для владельца

Страница: 456 / 508

5 - 46
CHAS
ASSEMBLY AND INSTALLATION
Throttle grip assembly
1. Install:
●
Collar 1
●
Handlebar grip (right) 2
Apply the adhesive on the tube guide
3 .
NOTE:
Before applying the adhesive, wipe off grease
or oil on the tube guide surface
a
with a lac-
quer thinner.
Handlebar
1. Install:
●
Handlebar 1
●
Handlebar holder 2
●
Bolt (handlebar holder) 3
NOTE:
●
Align the punched mark
a
on the handlebar
with the upper surface of the handlebar
holder on the upper bracket.
●
The handlebar holder should be installed
with the punched mark
b
forward.
●
First tighten the bolts on the front side of the
handlebar holder, and then tighten the bolts
on the rear side.
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
HANDLEBAR