Yamaha TEO'S XN125, Руководство пользователя

Страница: 49 / 90

6
PERIODIC MAIPERIODIC MAINTENANCE AND MINOR REPAIR
6-11
4. Clean the oil strainer with solvent,
and then check it for damage and
replace it if necessary.
5. Check the O-ring for damage and
replace it if necessary.
6. Install the oil strainer, spring, O-ring
and engine oil drain bolt, and then
tighten the drain bolt to the
specified torque.
Tightening torque:
Engine oil drain bolt:
32 Nm (3.2 m•kg)
NOTE:
Make sure that the O-ring is properly
seated.
7. Add the specified amount of the
recommended engine oil, and then
install and tighten the oil filler cap.
Recommended engine oil:
See page 8-1.
Oil quantity:
Periodic oil change:
1.2 L
Total amount (dry engine):
1.4 L
CAUTION:
8. Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking,
immediately turn the engine off and
check for the cause.
9. Reset the oil change indicator light
according to the following
procedure.
EC00030
• Do not mix any chemical additi-
ves with the oil or use oils of a
higher grade than “CD”. In addi-
tion, do not use oils labeled
“ENERGY CONSERVING II” or
higher.
• Make sure that no foreign
material enters the crankcase.
1. O-ring
2. Compression spring
3. Strainer
3
2
1
ZAUM0040