manualshive.com logo in svg

Yamaha TEO'S XN125, Руководство пользователя

Поделиться
Скачать
Yamaha TEO'S XN125 Скачать руководство пользователя страница 61

6

ZAUM0061

PERIODIC MAINTENANCE AND MINOR REPAIR

6-23

EAU00781

Lubricating the front and rear
brake levers

The pivoting points of the front and rear
brake levers must be lubricated at the
intervals specified in the periodic main-
tenance and lubrication chart.

Recommended lubricant:

Engine oil

WARNING

EAU02939

Checking the front fork

The condition and operation of the front
fork must be checked as follows at the
intervals specified in the periodic main-
tenance and lubrication chart.

To check the condition

Check the inner tubes for scratches,
damage and excessive oil leakage.

EW000115

Securely support the scooter so that
there is no danger of it falling over.

WARNING

ZAUM0062

EAUM0013

Checking and lubricating the
centerstand

The operation of the centerstand
should be checked before each ride,
and the pivots and metal-to-metal con-
tact surfaces should be lubricated if
necessary.

EW000114

If the centerstand does not move up
and down smoothly, have a Yamaha
dealer check or repair it.

Recommended lubricant:

Lithium-soap-based grease
(all-purpose grease)

Содержание TEO'S XN125



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды