Yamaha TEO'S XN125, Руководство пользователя

Страница: 70 / 90

6
PERIODIC MAINTENANCE AND MINOR REPAIR
6-32
Engine overheating
NOTE:
If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended
coolant as soon as possible.
EW000070
Do not remove the radiator cap when the engine and radiator are hot. Scalding hot fluid and steam may be blown
out under pressure, which could cause serious injury. Be sure to wait until the engine has cooled.
After removing the radiator cap retaining bolt, place a thick rag, like a towel, over the radiator cap, and then slowly
rotate the cap counterclockwise to the detent to allow any residual pressure to escape. When the hissing sound
has stopped, press down on the cap while turning it counterclockwise, and then remove the cap.
WARNING
Wait for the engine to
be cold. Check the coolant level in the coolant
reservoir and/or in the radiator.
The level is low:
check for the
coolant leakage.
Level is good.
Leakage.
No leakage.
Add coolant
(see NOTE).
Start the engine. If the engine get warm again, ask a
Yamaha dealer to check and repair the coolant system.
Ask a Yamaha dealer to check and
repair the coolant system.