manualshive.com logo in svg

Yamaha TEO'S XN125, Руководство пользователя

Поделиться
Скачать
Yamaha TEO'S XN125 Скачать руководство пользователя страница 66

6

PERIODIC MAINTENANCE AND MINOR REPAIR

6-28

EC000105

Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely
affected. Thoroughly clean off any
dirt and fingerprints on the headlight
bulb using a cloth moistened with
alcohol or thinner.

CAUTION:

1

1

ZAUM0067

1. Bulb

6. Connect the headlight connector

and install the cowling C.

Replacing a front turn signal light
bulb

1. Remove cowling C (See page 6-7

for cowling removal and installation
procedures).

2. Remove the headlight connector.
3. Remove the socket (together with

the turn signal light bulb) by turning
it counterclockwise.

4. Remove the defective bulb.
5. Place a new bulb into position.
6. Install the socket (together with the

bulb) by turning it clockwise.

7. Connect the headlight connector

and install the cowling C.

1

ZAUM0068

1. Bulb

EAUM0036

Replacing a rear turn signal
light bulb

1. Remove the turn light signal unit by

removing the screw.

2.  Remove the socket (together with

the turn signal light bulb) by turning
it counterclockwise.

3. Remove the defective bulb by

pulling it outward and turning it
counterclockwise.

4. Insert a new bulb into the socket.
5. Install the socket (together with the

bulb) by turning it clockwise.

6. Install the turn signal light unit by

installing the screw.

Содержание TEO'S XN125



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды