Yamaha SR10LE Скачать руководство пользователя страница 4

Страница: 4 / 52

Foreword

Congratulations! You have chosen a quality Yamaha Snowmobile designed and

assembled to give dependable service. Be sure, as the owner/operator of a Yamaha

Snowmobile, to become thoroughly familiar with its basic operation, maintenance,

and off-season storage procedures. Read this manual and the accompanying Snow-

mobile Safety Handbook before operating the snowmobile to learn safe and proper

use of your new Yamaha Snowmobile. Always operate the snowmobile within your

level of skill and current terrain conditions.
The Operator’s Manual, Snowmobile Safety Handbook, and Snowmobile Decals

display the words Warning, Caution, and Note to emphasize important information.

The symbol

! WARNING

identifies personal safety-related information. Be

sure to follow the directive because it deals with the possibility of serious personal

injury or even death. A

CAUTION

identifies unsafe practices which may result

in snowmobile-related damage. Follow the directive because it deals with the possi-

bility of damaging part or parts of the snowmobile. The symbol



NOTE:

identi-

fies supplementary information worthy of particular attention.
This manual covers operator-related maintenance, operating instructions, and off-

season storage instructions. If major repair or service is ever required, contact an

authorized Yamaha Snowmobile dealer for professional service.
At the time of publication, all information and illustrations were technically cor-

rect. Some illustrations used in this manual are used for clarity purposes only and

are not designed to depict actual conditions. Because Yamaha constantly refines

and improves its products, no retroactive obligation is incurred.
This Operator’s Manual should be considered a permanent part of the snowmobile

and must remain with the snowmobile at the time of resale. If the snowmobile

changes ownership more than once, contact Yamaha, Service Department, P.O. Box

6555, Cypress, CA 90630, for proper registration information. This manual was

prepared by the Product Service and Warranty Department of Yamaha.
Every Yamaha Snowmobile meets or exceeds the standards of the Snowmobile

Safety and Certification Committee and displays the SSCC decal. Yamaha endorses

and encourages the safe use of all snowmobiles. Always wear a helmet and eye pro-

tection. Drive with caution, observe all state and local regulations, and respect the

rights of others. ISMA members like Yamaha do their part to improve trails, spon-

sor events, and generally support the sport of snowmobiling. As a member of the

National Snowmobile Foundation, Yamaha promotes snowmobiling through edu-

cation, charity, and research programs.

Содержание SR10LE





















































Результаты поиска

Содержание SR10LE

Отзывы:

Бренды по названию

Популярные бренды

Yamaha SR10LE, Руководство оператора

Результаты поиска

Содержание SR10LE

Отзывы:

Бренды по названию

Популярные бренды