Yamaha SPX1000, Руководство по эксплуатации

Страница: 30 / 79

PARAMETERS ACCESSED BY THE INT PARAM PARAMETERS ACCESSED BY THE INT PARAM
KEY KEY
Stereo or Mono x 2 Output (OUT MODE): ST, MONO
x 2
Stereo or Mono x 2 Output (OUT MODE): ST, MONO
x 2
When set to ST (stereo), the output of the left and right-
channel processors are mixed and the output signal is
delivered in stereo. When MONO x 2 is selected the left and
right-channel processors are completely independent. When set to ST (stereo), the output of the left and right-
channel processors are mixed and the output signal is
delivered in stereo. When MONO x 2 is selected the left and
right-channel processors are completely independent.
Plate Low-pass Filter Frequency (PLT LPF): 1 – 16
kHz, THRU
Permits rolling off the high-frequency content of the PLATE
signal above the set frequency. The LPF is OFF when set to
THRU.
Hall Low-pass Filter Frequency (HAL LPF): 1 – 16
kHz, THRU
Permits rolling off the high-frequency content of the HALL
signal above the set frequency. The LPF is OFF when set to
THRU.
32. ER + REV
PARAMETERS ACCESSED BY THE PARAM KEY
Early Reflection Type (ER TYPE): Refer to EARLY REF. 1
on page16.
Early Reflection Room Size (ROOM SIZE): Refer to EARLY
REF. 1 on page 16.
Early Reflection Liveness (LIVENESS): Refer to EARLY
REF. 1 on page 16.
Early Reflection Diffusion (ER DIF): Refer to EARLY REF. 1
on page 16.
Early Reflection Initial Delay (ER DLY): Refer to EARLY
REF. 1 on page 16.
Rev Reverb Time (REV RT): Refer to REV 1 HALL on page
14.
Rev High Frequency Reverb Time Ratio (REV HIGH): Refer
to REV 1 HALL on page 14.
Reverb Low-pass Filter Frequency (REV LPF): I- 16
kHz, THRU
Permits rolling off the high-frequency content of the REV
signal above the set frequency. The LPF is OFF when set to
THRU.
33. ECHO + REV
PARAMETERS ACCESSED BY THE PARAM KEY
Echo Left Channel Delay (Lch DLY): Refer to STEREO
ECHO on page 17.
Echo Left Channel Feedback (Lch FB): Refer to STEREO
ECHO on page 18.
Echo Right Channel Delay (Rch DLY): Refer to STEREO
ECHO on page 18.
Echo Right Channel Feedback (Rch FB): Refer to STEREO
ECHO on page 18.
Echo High Frequency Feedback (ECHO HIGH): Refer to
STEREO ECHO on page 18.
Rev Reverb Time (REV RT): Refer to REV 1 HALL on page
14.
Rev High Frequency Reverb Time Ratio (REV HIGH): Refer
to REV 1 HALL on page 14.
Rev Diffusion (REV DIF): Refer to REV 1 HALL on page 14.
Rev Initial Delay (REV DLY): Refer to REV 1 HALL on page
14.
Rev Diffusion (REV DIF): Refer to REV 1 HALL on page 14.
Rev Initial Delay (REV DLY): Refer to REV 1
HALL on page 14.
27