Yamaha SPX1000 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 79

background image

Trigger Delay (TRG. DLY): -5800 – +1000

milliseconds

This parameter sets a delay between triggering and actual
initiation of the sampling process. If a negative value is
specified, input signals are temporarily stored and the sound is

sampled from the specified time before the trigger occurs.

Record Ready (RECORD):

The RECORD display must be called before sampling can
begin. With the RECORD display showing, press the
parameter

key and display will change to RECORD

READY. Sampling can now be starting using either the

MANUAL or AUTO method described above. The display
changes to “- - - - - -” while sampling is in progress, and then
to “OK” when sampling is complete. Any previous data in the
freeze memory is erased when the RECORD function is
executed.
The sampled sound can now be played back by pressing the
TRIGGER key or a footswitch connected to the rear-panel
TRIGGER 1 SW jack. Playback can also be triggered by an

input signal of sufficient amplitude if the INPUT TRG
parameter is ON OR BY A SIGNAL APPLIED TO THE
REAR-PANEL TRIGGER 2 ANALOG JACK IF THE

ANALOG TRG PARAMETER IS ON (see PARAMETERS
ACCESSED BY THE INT PARAM KEY). Pitched playback
of the sampled sound is possible by transmitting MIDI note
ON messages to the SPX1000’s MIDI IN connector from a
MIDI keyboard or other device (e.g. play a key on the
keyboard).

Overdub Ready (OVERDUB):

RECORD (see above) is used to sample a new sound.
OVERDUB is used to record a new sound over a previously
recorded sound. Call the OVERDUB display and begin
overdubbing by using either the MANUAL or AUTO method
described above. The display changes to “

” while

overdubbing is in progress, and then to “OK” when
overdubbing is complete. OVERDUB can be repeated as many
times as necessary.
The initially recorded and overdubbed sound can now be
played back by pressing the TRIGGER key or a footswitch
connected to the rear-panel TRIGGER 1 SW jack. Playback
can also be triggered by an input signal of sufficient amplitude

if the INPUT TRG parameter is on or by a signal applied to
the rear-panel trigger 2 analog jack if the analog trg parameter
is on (see PARAMETERS ACCESSED BY THE INT
PARAM KEY). Pitched playback of the sampled sound is
possible by transmitting MIDI note ON messages to the
SPX1000’s MIDI IN connector from a MIDI keyboard or
other device (e.g. play a key on the keyboard).

Playback Start Point (START): 0 – 5800 milliseconds

Total sample time is 5800 milliseconds (5.8 seconds). This
parameter determines at what point playback will begin when
a trigger occurs.

Playback End Point (END): 0 – 5800 milliseconds

This parameter determines at what point playback will end. If
the END point is set to a time earlier than the START point
(above), the sampled sound will be played back in reverse.

22

«
...
23
24
25
26
27
...
»

Содержание SPX1000
















































































Отзывы:

Нет отзывов

Похожие инструкции для SPX1000

Бренд: MAHLE Страницы: 21

Бренд: Campden instruments Страницы: 8

Бренд: Panasonic Страницы: 9

Бренд: Haigh Страницы: 60

Бренд: ICELED Страницы: 4

Бренд: Facom Страницы: 4

Бренд: FaceLake Страницы: 2

Бренд: JB-Lighting Страницы: 32

Бренд: W&H Страницы: 72

Бренд: Raymarine Страницы: 124

Бренд: Raymarine Страницы: 192

Бренд: UEi Страницы: 5

Бренд: UGO BASILE Страницы: 47

Бренд: UFO Страницы: 16

Бренд: Yamaha Страницы: 29

Бренд: Onwa Страницы: 35

Бренд: Rigol Страницы: 12

Бренд: Crosley Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды