136
Utility Mode
■
BCCurve (TG Breath Curve)
Set the Breath Curve determining how the strength
with which you blow into the Breath Controller will
affect the sound output.
❏
Settings:
thru, soft, hard, wide
CTRL (System Controller)
In Voice Mode, you can set parameters for Controllers.
The following four screens are available.
CTRL KnobA (Control Knob [A])
CTRL KnobB (Control Knob [B])
CTRL KnobC (Control Knob [C])
CTRL Other (Control Other)
CTRL Knobs [A] to [C]
You can assign various control functions to Assignable
Knobs [A] to [C] on the front panel.
CTRL KnobA) CC# Dest
Sys 67[--------] EQLow-G
wide
Adjusted Breath Control
Received Breath Control
hard
Adjusted Breath Control
Received Breath Control
soft
Adjusted Breath Control
Received Breath Control
thru
Adjusted Breath Control
Received Breath Control
■
CC# (Control Number)
Assign MIDI Control Change Numbers to Assignable
Knobs [A] to [C].
❏
Settings:
000 ~ 095 (see the separate Data List for
details)
■
Dest (Control Destination)
Set the function to be controlled by Assignable
Knobs [A] to [C].
❏
Settings:
see the separate Data List for details
The positions of Knobs [A]/[B]/[C] can be memorized
for each Voice, Performance.
If a Master Equalizer parameter is selected as the
destination, the M.EQ settings of “vce” (in Utility
Mode) are increased/decreased Using Knobs
[A]/[B]/[C].
CTRL Other (Controller Other)
Set the Foot Switch and Foot Volume parameters.
■
FS (Foot Switch)
Assign a Control Change message to the Foot Switch.
❏
Settings:
000 ~ 100 (000/032 = off, 096 = Arp Sw, 097
= Arpeggio Hold, 098 = Sequence PLAY/STOP,
099/100 = Program Change INC/DEC)
Details about Control Numbers and Control Changes
are given in the separate Data List.
■
FV (Foot Volume)
Select whether Foot Volume controls the Main
Volume or Expression parameter.
❏
Settings:
volume (Main Volume), expression
Details about the Main Volume and Expression
parameters are given in the separate Data List.
CTRL Other) FS FV
Sys 65[Porta Sw] volume
