IMPORTANT SAFETY INSTRUCTIONS
INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,
AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.
WARNING-
When using any electrical or electronic product, basic
precautions should always be followed. These precautions include,
but are not limited to, the following:
1.
Read all Safety Instructions, Installation Instructions, Special
Message Section items, and any Assembly Instructions found in this
manual BEFORE making any connections, including connection to the
main supply.
2.
Do not attempt to service this product beyond that described
in the user-maintenance instructions. All other servicing should be
referred to qualified service personnel.
3.
Main Power Supply Verification: Yamaha products are manu-
factured specifically for the supply voltage in the area where they are
to be sold. If you should move, or if any doubt exists about the sup-
ply voltage in your area, please contact your dealer for supply voltage
verification and (if applicable) instructions. The required supply voltage
is printed on the name plate. For name plate location, please refer to
the graphic found in the Special Message Section of this manual.
4.
DANGER-Grounding Instructions: This product must be
grounded and therefore has been equipped with a three pin attach-
ment plug. If this product should malfunction, the ground pin provides
a path of low resistance for electrical current, reducing the risk of elec-
trical shock. If your wall socket will not accommodate this type plug,
contact an electrician to have the outlet replaced in accordance with
local electrical codes. Do NOT modify the plug or change the plug to
a different type!
5.
WARNING: Do not place this product or any other objects on
the power cord or place it in a position where anyone could walk on,
trip over, or roll anything over power or connecting cords of any kind.
The use of an extension cord is not recommended! If you must use an
extension cord, the minimum wire size for a 25’ cord (or less) is 18
AWG. NOTE: The smaller the AWG number, the larger the current
handling capacity. For longer extension cords, consult a local electri-
cian.
6.
Ventilation: Electronic products, unless specifically designed
for enclosed installations, should be placed in locations that do not
interfere with proper ventilation. If instructions for enclosed installa-
tions are not provided, it must be assumed that unobstructed ventila-
tion is required.
7.
Temperature considerations: Electronic products should be
installed in locations that do not seriously contribute to their operating
temperature. Placement of this product close to heat sources such as;
radiators, heat registers etc., should be avoided.
8.
This product was NOT designed for use in wet/damp loca-
tions and should not be used near water or exposed to rain. Examples
of wet /damp locations are; near a swimming pool, spa, tub, sink, or
wet basement.
9.
This product should be used only with the components sup-
plied or; a cart ,rack, or stand that is recommended by the manufac-
turer. If a cart, rack, or stand is used, please observe all safety mark-
ings and instructions that accompany the accessory product.
10.
The power supply cord (plug) should be disconnected from
the outlet when electronic products are to be left unused for extend-
ed periods of time. Cords should also be disconnected when there is
a high probability of lightening and/or electrical storm activity.
11.
Care should be taken that objects do not fall and liquids are
not spilled into the enclosure through any openings that may exist.
12.
Electrical/electronic products should be serviced by a quali-
fied service person when:
a. The power supply cord has been damaged; or
b. Objects have fallen, been inserted, or liquids have been
spilled into the enclosure through openings; or
c. The product has been exposed to rain; or
d. The product does not operate, exhibits a marked change
in performance; or
e. The product has been dropped, or the enclosure of the
product has been damaged.
13.
This product, either alone or in combination with an amplifier
and headphones or speaker/s, may be capable of producing sound
levels that could cause permanent hearing loss. DO NOT operate for
a long period of time at a high volume level or at a level that is uncom-
fortable. If you experience any hearing loss or ringing in the ears, you
should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period before
damage occurs.
14.
Some Yamaha products may have benches and/or accesso-
ry mounting fixtures that are either supplied as a part of the product or
as optional accessories. Some of these items are designed to be deal-
er assembled or installed. Please make sure that benches are stable
and any optional fixtures (where applicable) are well secured BEFORE
using. Benches supplied by Yamaha are designed for seating only. No
other uses are recommended.
PLEASE KEEP THIS MANUAL
92-469-3
