92
En
Graphical user interface (GUI) screen
Front (Front speakers)
• When “Bass Out” is set to “Front”, the LFE signals found in
bitstream sources, the low-frequency signals of the front left
and right channels, and the low-frequency signals of other
speakers set to “Small” are all directed to the front left and right
speakers regardless of the “Front” setting.
• When “Bass Out” is set to “Front”, you can select only “Large”
in “Front”. If the value of “Front” is set to other than “Large” in
advance, this unit change the value to “Large” automatically.
Center (Center speaker)
Surround (Surround left/right speakers)
y
See page 15 for the connection information of the surround
speakers.
Surround Back
(Surround back left/right speakers)
y
See page 15 for the connection information of the surround
speakers.
Presence (Presence speakers)
Use this feature if you want to use the presence speakers
connected to this unit.
• If you set “Presence” to “No”, you cannot activate the CINEMA
DSP 3D mode (see page 50).
• “Dialogue Lift” is available only when “Presence” is set to
“Yes” (see page 75).
Bass Out (Bass out)
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals.
LFE signals output
Measure for the speaker size
The woofer section of a speaker is
– 16 cm (6.5 in) or larger: large
– smaller than 16 cm (6.5 in): small
Choice
Descriptions
Large
Select this setting when the front speakers are
large.
Small
Select this setting when the front speakers are
small.
Notes
Choice
Descriptions
Large
Select this setting when the center speaker is
large.
Small
Select this setting when the center speaker is
small.
None
Select this setting when you do not use the
center speaker. The center channel signals are
directed to the front left and right speakers.
Choice
Descriptions
Large
Select this setting when the surround speakers
are large.
Small
Select this setting when the surround speakers
are small.
None
Select this setting when you do not use the
surround speakers. This unit is set to the Virtual
CINEMA DSP mode (see page 50), and
“Surround Back” is automatically set to “None”.
Choice
Descriptions
Large x1
Select this setting when the single surround back
speaker is large.
Large x2
Select this setting when the surround back left
and right speakers are Large.
Small x1
Select this setting when the single surround back
speaker is small.
Small x2
Select this setting when the surround back left
and right speakers are small.
None
Select this setting when you do not use the
surround back speakers. The surround back
channel signals are directed to the surround left
and right speakers.
Choice
Descriptions
Yes
Select “Yes” when you use the presence
speakers.
None
Select “None” when you do not use the presence
speakers.
Notes
Choice
Subwoofer and speakers
Subwoofer
Front
speakers
Other
speakers
Both
Output
Output
No output
SWFR
Output
No output
No output
Front
No output
Output
No output
