Yamaha RX-V2067, Руководство пользователя

Страница: 21 / 149

CONNECTIONS
Connecting speakers
En
21
■
Bi-amp connection
This unit can be connected to speakers that support bi-amp
connections. When connecting speakers, connect the FRONT jacks
and the SURROUND BACK/BI-AMP jacks as in the diagram
below. Configure the bi-amp settings to activate connections.
■
Multi-zone audio system using the internal
amplifier of this unit
Connect the speakers in the second zone and the third zone to the
EXTRA SP1/EXTRA SP2 jacks as in the diagram below.
■
Changing speaker impedance
This unit is configured for 8
Ω
speakers at factory setting.
When connecting to 6
Ω
speakers, carry out the following
procedure to switch to 6
Ω
. When this unit is configured for 6
Ω
speakers, 4
Ω
speakers can also be used as the front speakers.
1
Switch this unit to the standby mode.
2
Press MAIN ZONE
A
while pressing and holding
STRAIGHT on the front panel.
Release the keys when “ADVANCED SETUP” is displayed on
the front panel display.
After approximately a few seconds, the top menu item is
displayed.
J
2
NOTE
Before making bi-amplification connections, remove any
brackets or cables that connect a woofer with a tweeter. Refer to
the instruction manuals of speakers for details. When not
making bi-amplification connections, make sure that the
brackets or cables are connected before connecting the speaker
cables.
EXTRA SP1
ZONE2/ZONE3
ANTENNA
75
AC IN
SURROUND SURROUND BACK/
SPEAKERS
CENTER
AV 1
HDMI OUT
AV 2 AV 3 AV 4
HDMI
AV 5 AV 6 AV 7
SINGLE
FRONT
BI-AMP
EXTRA SP2
1 2
PHONO
GND
(1 BD/DVD)
AV 1
DOCK NETWORK
AV 2 AV 3 AV 4
AV 3
AV 4
COAXIAL COAXIAL OPTICAL OPTICAL OPTICAL
AUDIO 1 (2 TV) (3 CD) AUDIO 2 AUDIO 3 AUDIO 4
FRONT SURROUND SUR. BACK SUBWOOFER
CENTER MULTI CH INPUT
COMPONENT VIDEO
COAXIAL
MONITOR OUT/ZONE OUT
ZONE OUT PRE OUT
ZONE 2 FRONT/
F. PRESENCE
AV OUT
a b c d e f
Y PB PR
Y PB PR Y PB PR C
D
SURROUND SUR. BACK CENTER (REAR)
(FRONT)
SUBWOOFER
1
2
RS-232C
IN
1 2
2
1
OUT IN OUT
REMOTE
TRIGGER
OUT
+12V 0.1A MAX.
MON.OUT/ZONE OUT
ARC ARC SELECTABLE
ZONE 3
AV 1
AV 2
A
B
(1 BD/DVD)
(SINGLE)
ZONE2/ZONE3/
F.PRESENCE
GND AM FM (4 RADIO)
SURROUND BACK/
SPEAKERS
SINGLE
BI-AMP
E 2
F. PRESENCE
SURROUND SUR. B ZONE 3
FRONT
CENTER
FER
ZONE 3
FRONT
SINGLE
SURROUND BACK/
SPEAKERS
BI-AMP
CAUTION
The EXTRA SP jacks of this unit should not be connected to a
Passive Loudspeaker Selector Box or more than one loudspeaker
per channel.
Connection to a Passive Loudspeaker Selector Box or multiple
speakers per channel could create an abnormally low impedance
load resulting in amplifier damage. See this owner’s manual for
correct usage.
Compliance with minimum speaker impedance information for all
channels must be maintained at all times. This information is found
on the back panel of this unit.
EXTRA SP1
ZONE2/ZONE3
ANTENNA
75
AC IN
SURROUND SURROUND BACK/
SPEAKERS
CENTER
AV 1
HDMI OUT
AV 2 AV 3 AV 4
HDMI
AV 5 AV 6 AV 7
SINGLE
FRONT BI-AMP
EXTRA SP2
1 2
PHONO
GND
(1 BD/DVD)
AV 1
DOCK NETWORK
AV 2 AV 3 AV 4
AV 3
AV 4
COAXIAL COAXIAL OPTICAL OPTICAL OPTICAL
AUDIO 1
(2 TV) (3 CD)
AUDIO 2 AUDIO 3 AUDIO 4
FRONT SURROUND SUR. BACK SUBWOOFER
CENTER
MULTI CH INPUT
COMPONENT VIDEO
COAXIAL
MONITOR OUT/ZONE OUT
ZONE OUT PRE OUT
ZONE 2 FRONT/ F. PRESENCE
AV OUT
a b c d e f
Y PB PR
Y PB PR Y PB PR C
D
SURROUND SUR. BACK CENTER (REAR)
(FRONT)
SUBWOOFER
1
2
RS-232C
IN
1 2
2
1
OUT IN OUT
REMOTE
TRIGGER
OUT
+12V 0.1A MAX.
MON.OUT/ZONE OUT
ARC ARC SELECTABLE
ZONE 3
AV 1
AV 2
A
B
(1 BD/DVD)
(SINGLE)
ZONE2/ZONE3/ F.PRESENCE
GND AM FM (4 RADIO)
ZONE2/ZONE3
EXTRA SP2
FRONT SURRO AXIAL
EXTRA SP1
ZONE2/ZONE3/ F.PRESENCE
EXTRA SP1
ZONE2/ZONE3/
F.PRESENCE
ZONE2/ZONE3
EXTRA SP2
Zone3
J
1 Zone2
J
1
MAIN ZONE
A
STRAIGHT
Continues to the
next page
J
1 :
EXTRA SP1 jacks can be assigned to Zone3 and EXTRA SP2 jacks can be
assigned to Zone2 by using “Power Amp Assign” (
☞
p. 94 ).
J
2 : Refer to the “Extended functionality that can be configured as needed
(Advanced Setup menu)” (
☞
p. 121 ) for details on the Advanced Setup menu.