PLAYBACK
Playing back tunes from Bluetooth™ components
En
78
Using Bluetooth™ components
When pairing is complete, perform the following
procedure to achieve a wireless connection between this
unit and the Bluetooth component. When the wireless
connection is complete, Bluetooth components can be
played back.
1
Press
d
DOCK
to switch to the DOCK input.
2
Press
p
OPTION
to display the Option
menu.
3
Use
i
Cursor
B
/
C
to select “Connect” and
press
i
ENTER
.
J
1
4
Press
p
OPTION
to exit the Option menu.
5
Operate the Bluetooth component for
playback.
DOCK
OPTION
ENTER
SOURCE
RECEIVER
AV
AUDIO
4
3
1
2
7
5
6
V-AUX
4
3
1
2
USB
MULTI
NET
PHONO
TUNER
[ B ]
[ A ]
i
p
d
Depending on Bluetooth components, a wireless
connection is established automatically or by
operating the Bluetooth components. In that case, it is
not necessary to carry out the following procedure.
“Not found” is displayed when there is an error
connecting. Check that the following conditions have
been satisfied, and try to establish a wireless
connection again.
•
Both this unit and the Bluetooth component are paired.
•
The Bluetooth component is switched on.
•
The Bluetooth component is within 10 m of the
Bluetooth Wireless Audio Receiver.
To disconnect a wireless connection, repeat the same
steps, and in step 3, select “Disconnect.”
VOLUME
B T c o n n e c t e d
When wireless connection is complete
J
1 :
“Disconnect” is displayed when a Bluetooth component has been
connected.
