En
114
■
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level in conjunction with
volume adjustments.
Settings
Video
Configures the video output settings.
■
Analog to Analog Conversion
Enables/disables the video conversion (p.149) between the analog video jacks
(COMPONENT VIDEO, S VIDEO and VIDEO).
Settings
• This function works only when “Monitor Out Assign” (p.119) is set to “Main”.
• This unit does not convert 480-line and 576-line video signals interchangeably.
• 480p/576p-, 1080i- and 720p-resolution video signals cannot be output from the S VIDEO and VIDEO
jacks (p.149).
■
Processing
Enables/disables the video signal processing (resolution, aspect ratio and video
adjustments).
Settings
❑
Resolution
Selects a resolution to output HDMI video signals when “Processing” is set to “On”.
Settings
• If you need to select a resolution that is not supported by your TV, set “MONITOR CHECK” (p.126) in the
“ADVANCED SETUP” menu to “SKIP” and try again. (Note that output videos may not be displayed on your
TV normally.)
❑
Aspect
Selects an aspect ratio to output HDMI video signals when “Processing” is set to “On”.
Settings
• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i or 1080p
signals.
Off
Does not adjust the effect level automatically.
On (default)
Adjusts the effect level automatically. Also, the effect level is corrected
according to the measurement results of “Auto Setup” (p.44).
Off
Disables the video conversion between the analog video jacks.
On (default)
Enables the video conversion between the analog video jacks.
Converted video signals are output from the MONITOR OUT jacks only.
Off (default)
Disables the video signal processing.
On
Enables the video signal processing.
Configure the settings in “Resolution”, “Aspect” and “Adjustment”.
Through
Does not convert the resolution.
Auto (default)
Selects a resolution automatically in accordance with TV
resolution.
480p/576p, 720p, 1080i,
1080p
Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)
Through (default)
Does not convert the aspect ratio.
16:9 Normal
Outputs 4:3 video signals to a 16:9 TV with black bands on either
side of the screen.
Smart Zoom
Adjusts 4:3 video signals to fit a 16:9 TV. (The edges of video
images may be distorted.)
Содержание RX-A2010
Страница 157: ... 2011 Yamaha Corporation YD505A0 OMEN1 ...