Yamaha RX-A2010, Руководство пользователя

Страница: 46 / 170

En
46
Measuring at one listening position
(single measure)
When “Multi Position” is set to “No”, follow the procedure below to
make the measurement.
• YPAO measurement is not performed correctly when any obstacles are in the
room.
• During the measuring process (about 3 minutes), keep stuff in the corners or
remove it from the room.
1
To start the measurement, use the cursor keys to
select “Measure” and press ENTER.
The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.
• To cancel the measurement, press RETURN.
The following screen appears on the TV when the
measurement finishes.
• If any error message (such as E-1) or warning message (such as W-1)
appears, see “Error messages” (p.49) or “Warning messages” (p.50).
• To check the measurement results, select “Result”. For details, see
“Checking the measurement results” (p.48).
2
Use the cursor keys to select “Save/Cancel” and
press ENTER.
3
To save the measurement results, use the cursor
keys to select “SAVE” and press ENTER.
The corrected speaker settings are applied.
• To finish the measurement without saving the result, select “CANCEL”.
4
Disconnect the YPAO microphone from this unit.
Now optimization of the speaker settings is complete.
Caution
• Since the YPAO microphone is sensitive to heat, do not place the microphone
in any place where it will be subjected to direct sunlight or high temperatures
(top of an AV equipment, etc).
1 2 3 4 5 6 7 8
Automatic speaker setup
SOURCE RECEIVER
AV
AUDIO
1 2 3 4
5 6 7 V-AUX
1 2 3 4
MULTI PHONO USB NET
TUNER DOCK SIRIUS [ A ]
CLASSICAL
LIVE
CLUB
ENTERTAIN
MOVIE STEREO STRAIGHT
INPUT
PURE
DIRECT
MUTE
TV
SCENE
1 2 3 4
PROGRAM VOLUME
TV VOL
MUTE
MODE
HOLD TAG PRG SELECT
TOP MENU
RETURN DISPLAY
POP-UP/MENU
TV CH
PRESET
ENTER
ON SCREEN OPTION
SOURCE RECEIVER
AV
AUDIO
1 2 3 4
5 6 7 V-AUX
1 2 3 4
MULTI PHONO USB NET
TUNER DOCK SIRIUS [ A ]
ENTER
RETURN ENTER
RETURN
Cursor keys