Yamaha RX-A2010, Руководство пользователя

Страница: 109 / 170

En
109
Speaker (Manual Setup)
Configures the speaker settings manually.
■
Setting Pattern
Registers two speaker setting patterns and switches between them.
When you configure the following speaker settings, the settings will be memorized in
the selected pattern.
- Measurement results (Auto Setup)
- Power Amp Assign
- Configuration
- Distance
- Level
- Parametric EQ
Settings
Pattern1 (default), Pattern2
• The setting pattern currently selected is shown at the top of the “Auto Setup” and “Manual Setup” screens.
■
Setting Data Copy
Copies the “Setting Pattern” parameters in the specified direction.
Choices
■
Power Amp Assign
Selects a speaker system.
This unit has 9 built-in amplifiers. You can connect 2 to 11 speakers and up to 2
subwoofers (with built-in amplifier) to create the favorite acoustic space in your room.
You can also apply bi-amp connections, channel expansion (using an external power
amplifier) or multi-zone configurations to enhance your system.
Settings
Pattern1 > 2 Copies the “Pattern1” parameters to “Pattern2”.
Pattern2 > 1 Copies the “Pattern2” parameters to “Pattern1”.
Basic (default)
Select this when you use the basic speaker configuration (9-channel
plus rear presence speakers) (p.16).
7ch +1ZONE
Select this when you use 7-channel speakers in the main zone and
Zone2 (or Zone3) speakers (p.24).
You can select a zone to be assigned to the EXTRA SP1 jacks
(default: Zone2).
9ch +1ZONE
Select this when you use 9-channel speakers in the main zone and
Zone3 (or Zone2) speakers (p.24).
You can select a zone to be assigned to the EXTRA SP2 jacks
(default: Zone3).
7ch +2ZONE
Select this when you use 7-channel speakers in the main zone, plus
Zone2 and Zone3 speakers (p.25).
You can select a zone to be assigned to the EXTRA SP1 jacks
(default: Zone2) and EXTRA SP2 jacks (default: Zone3).
7ch
+FRONT+1ZONE
Select this when you use 7-channel speakers plus front channel
expansion using an external amplifier in the main zone and Zone3 (or
Zone2) speakers (p.23).
You can select a zone to be assigned to the EXTRA SP2 jacks
(default: Zone3).
5ch
+FRONT+2ZONE
Select this when you use 5-channel speakers plus front channel
expansion using an external amplifier in the main zone, plus Zone2 and
Zone 3 speakers (p.23).
You can select a zone to be assigned to the EXTRA SP1 jacks
(default: Zone2) and EXTRA SP2 jacks (default: Zone3).
7ch BI-AMP
Select this when you use 7-channel speakers (including bi-amp front
speakers) (p.22).